Electric Cattle Brush

Self-initiated use: The brush activates when a cow tilts it, allowing cattle to initiate grooming without staff manually starting each cycle.

Rotating brush surface: The polypropylene brush provides a scratching surface and helps remove loose dirt from the coat.

Placement in cattle housing: Install the brush where animals can approach and leave freely without obstructing feeding areas, gates, or livestock handling routes.

Space and clearance: The listed brush diameter is 50 cm and the width is 60 cm. Check these dimensions against nearby partitions, feed barriers, gates, and cattle movement routes.

Mounting support: The unit uses a steel supporting arm for wall or pipe mounting. Select a support structure suitable for the assembly and its operating loads.

Maintenance access: Leave room to inspect the brush assembly, mounting points, and electrical connections.

Site assessment: Provide the installation location, available clearance, support type, and intended mounting height when requesting technical advice. Use the manufacturer's dimensional drawing and installation instructions for final positioning.

Power supply: The listed configuration is 220 V with a machine power of 0.2 kW. Confirm supply frequency, connection requirements, and compatibility with the farm's electrical system before ordering.

Stop-and-reverse protection: The listed safety function is intended to stop and reverse brush movement if a cow's tail becomes caught. Request the manufacturer's operating instructions to establish the function's operating conditions.

Pre-use checks: Verify the mounting stability, electrical connections, and operation of the safety mechanism before putting the equipment into service. For installations with multiple brushes, assess the power supply and mounting conditions at each location.

Customization requests can be evaluated according to the selected model, order quantity, and installation conditions. Confirm all non-standard requirements before production. 

Specification conformity: Check the supplied product against the agreed electrical ratings, brush dimensions, material, and mounting configuration.

Assembly and safety checks: Review the brush assembly, steel supporting arm, mounting points, and applicable electrical components. Request confirmation of the stop-and-reverse function for the supplied model.

Technical documentation: Agree on the required specifications, installation instructions, and inspection records before ordering. Any certification or test report should be verified against the actual product and available documentation.